Description

Pureseal StoneClean Pro is a bespoke formulation for dedicated cleaning of Limestone, Travertine, Onyx & Marble. The surface acting surfactants and sequestrants in the solution lift dirt, foot traffic, carbon from fire damage and organic staining with minimum dwell times. Diluted to 1:10 this product will make an excellent multi-purpose degreaser.

Application:

Always test a small area before use to ensure compatability. Shake container well before use. This product is corrosive to metals and paint. Protecting other surfaces around the working area is essential. Remove all organic growth from the surface and wet the surface prior to application.

The product can be used at between 1:10 mixed with water to 1:3 mixed with water, always add PureSeal StoneClean Pro to water and never the other way around. Apply the product carefully with a brush or low pressure sprayer. Leave the product on the surface between 15 minutes and two hours then jet wash thoroughly.

Once rinsed, apply PureSeal NeutraRinse Pro to neutralise all surfaces that have been cleaned.

Top Tips:

Although designed for calcite stones, this product can be used on most surfaces Avoid contact with Aluminium and other delicate metals

PPE Required:

• Chemical resistant gloves,
• Eye protection
• Respirator with ABEK P3 filters,
• Overalls

Coverage:

Up to 6m² per litre