Description
Nu-Clear Pro is our label-compliant oxidiser, a professional-use-only blend of Sodium Hypochlorite, wetting agents, surfactants, and scent masks. The active ingredient is Sodium Hypochlorite at a strength of 10%. Nu-Clear Pro has been formulated to clean, sanitise, and disinfect most external hard surfaces.
This product should not be used as a biocide, and we always recommend cleaning the surface prior to use.
Application:
Always test on an inconspicuous area prior to use.
Clean the surface first with a pressure washer, or for severe build-up, treat the surface first with PureSeal BacClear Pro. Dilute Nu-Clear Pro to a ratio of 1 part product to 5 parts clean water. Apply the diluted product to the surface with a suitable sprayer or brush and leave it to dwell for 30 minutes without allowing the product to dry out; this is extremely important.
Once you have allowed a sufficient dwell time, agitate if required, then rinse thoroughly.
You may need to go stronger if required; moreover, this product can be used neat to spot-clean stubborn areas.
Top Tips:
- Always pre-wet any surrounding plants, grass and delicate surfaces that may come into contact with the product. We recommend doing this before and after using Nu-Clear Pro.
- Avoid allowing Nu-Clear Pro to come into contact with lead. If this happens, reverse the damage by using OxyAcid Pro.
- Nu-Clear Pro should not be allowed to contact bare aluminium or any other delicate metals as this may cause irreversible damage.
Coverage:
Up to 6m² per litre of diluted product
PPE Required:
- Chemical resistant gloves
- Eye protection
- Respirator with ABEK P3 filters
- Overalls with head and neck protection
