Description
PureSeal Graffiti Ghosting Remover is a blend of biodegradable detergents and also solvents formulated to remove all graffiti ghosting from porous surfaces. When removing graffiti from a porous surface, a ghostly outline where the graffiti was can still be visible. The ghosting will need removing too. This product will remove such stains leaving the surface completely clean. Ghosting Remover should be used after removing the bulk of the graffiti from porous surfaces with 4Midable.
Application:
Remove any loose moss, dirt or any other debris from the surface. A firm bristle brush is ideal. In addition to this, do not use if rain has been forecast or in wet weather. The ideal application temperature for Pureseal graffiti ghosting remover is between 7°C and 30°C. You need to wash and dry the surface completely before allowing pets in the area. Apply the product neatly using a brush, but you can also use a sprayer or a cloth. Apply a generous coating to the remaining ghosting and leave to dwell for up to 5 minutes. Do not allow the product to dry out. Remove with a pressure washer, taking care not to damage the underlying surface. Repeat if necessary.
Top Tips:
This product can remove stubborn graffiti if 4Midible fails to work. Using a magic sponge can improve the final result if the surface allows you to do so.
PPE Required:
- Eye Protection,
- Respiratory Protection
- Chemical Resistant Gloves
Coverage:
Between 2-5m² per litre, depending on the porosity of the surface.
